What is the Hario V60 Drip Scale?
Made by the company that makes the dripper, and shaped to sit under it.
Hario publishes 0.1 gram increments, a 2000g weight limit, a built-in timer for following and repeating brew recipes, an auto-off after 5 minutes that is not activated while the timer is in use, an LCD display, and a slim design intended to fit a server while keeping a small footprint.
The auto-off exception is the detail worth reading
Most scales switch off on a fixed timer regardless of what you are doing.
The KitchenTour publishes 120 seconds. A slow pour over or a long immersion brew can outlast that, and when a scale switches off mid-brew it takes the tare with it. You are then weighing from zero on a vessel that already holds 300g of coffee.
Hario suspends the countdown while the timer runs. That is a small piece of thinking that only occurs to somebody who has actually brewed on a scale, and it removes the single most annoying failure in this category.
Slim, and why that is about the server rather than storage
A V60 sits on a server, and the server plus dripper is tall.
Stack a scale, a glass server and a V60 and you have a tower. Every millimetre the scale adds raises the dripper further from the counter, which makes the pour less controlled and puts the rim closer to the kettle spout than you want.
Keeping the scale thin keeps that stack low. The footprint claim is the less interesting half: what matters is height, and Hario designs this alongside the brewer it goes under.
What it does not have
No flow rate, no auto timer start, no ratio calculator.
The Timemore Black Mirror shows flow rate and starts its timer on a weight change. The Maestri House S3 calculates a water target from a ratio you set. This does neither: you press the timer and you read the weight.
Hario also publishes no response time, no water resistance rating, no warranty term, no power source and no platform dimensions on this listing, and it carries a 4.2 rating across 2,418 reviews, which is lower than most scales here.
Is the Hario V60 Drip Scale worth it?
Worth it if you brew V60 and want the matching object. Beaten on features for the money.
It does the basics properly and the auto-off behaviour is genuinely better than its rivals. It also costs more than scales that do more, and the brand match is a real part of what you are paying for.
If features decide it, the Timemore Basic 2.0 adds flow rate for less. If you want the set to match and a scale that will not cut out mid-brew, this.
Who should buy it (and who should not)
Buy it for a V60 and a server.
It suits pour over specifically, a counter where height matters, and anybody who has had a scale die halfway through a brew.
Do not buy it for espresso, where a drip tray scale is the right shape. And do not buy it for flow rate, which it does not have.
Frequently Asked Questions
Does the Hario scale switch off mid-brew?
No. Auto-off is five minutes and Hario states it does not activate while the timer is running.
Does it show flow rate?
No. It weighs and it times.
How much can it weigh?
2000g at 0.1g.
Is it only for V60?
Hario designs it to accompany V60 drippers, but it is a normal scale and works with anything within its capacity.
How is it powered?
Not published on this listing.
